How to Check If Raspberry Pi Camera is Working

I got the answer from this site: https://www.raspberrypi.org/forums/viewtopic.php?t=46113 And the answer is: vcgencmd get_camera When the camera is connected, the output is like this: supported=1 detected=1 Credit for this answer goes to user znanev. Hats off to you sir.

Read More

Configuring headless raspberry pis

Yeah. Needed to do this for some testing, some websites needed hosting, some microservices needed running, and some other inane mundane stuff had to be done with these pi zeros I had. Now that they are set up, they are feeding me info and stats about different things like power usage, failed code builds, lagging…

Read More

How to install Motion for Raspberry Pi Camera Module

This comment was the most useful: Just have a look at the forum page:https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=44966&start=350 Following this instructions made motion working on a latest released jessie on rpi2: sudo apt-get install -y libjpeg-dev libavformat56 libavformat-dev libavcodec56 libavcodec-dev libavutil54 libavutil-dev libc6-dev zlib1g-dev libmysqlclient18 libmysqlclient-dev libpq5 libpq-dev wget https://www.dropbox.com/s/6ruqgv1h65zufr6/motion-mmal-lowflyerUK-20151114.tar.gz tar -zxvf motion-mmal-lowflyerUK-20151114.tar.gz ./motion -c motion-mmalcam-both.conf The following information…

Read More

Raspberry Pi 2: First Impression and Setup

Well it’s finally here and I finally did it. For the past two years I’ve gone back and forth between wanting to procure a Raspberry Pi. Not until now have they come out with a board that truly has some great hardware on it… a 900 MHz Quad-core… 1GB RAM… MicroSD instead of standard SD……

Read More